Stainless steel torx screw screwed out how to take out?

Today, a customer asked me that he screwed out the groove of the stainless steel torx screw, and the plum screwdriver did not work. How to take out the screwed screw? Here are some ways to try:

1. Pad the screwdriver with double-sided tape, non-woven cloth, etc., or use paper to increase the friction force if there is no way to do so.

2. Put a small amount of 502 glue into the screw hole, then turn the screw into it, and when the glue is set, turn the screw out with needle-nosed pliers.

3. When the screw cap is exposed, the screw can be removed after tightening the screw cap with a nib.

4 if the phone screw, the general use of the phone is stainless steel torx screw, is metal, the case is plastic, can not screw down, you can use a tip tip into the nut, heating the metal screw to make the plastic around the screw heated melting, with a tip nipper clamp, gently pull out.

5. Use a small electric drill to make a small hole in the center of the screwed screw, and then screw it in with a filamentous tap. Then it can be unscrewed.

If you need to produce stainless steel torx screw, find stone screw factory, they are professional!

Skype: kalyn qin M: +86 18124507113 Tel: +86 0755-85296744 Email: annie.li@szsst88.com Add: No. 11, Dinghou Road, Dongfang Community, Songgang Street, Baoan District, Shenzhen, Guangdong, China