How is countersunk cap screw used?

Many foreign customers use countersunk cap screw to indicate countersunk screws. In fact, the countersunk head screw is a flat head screw. The flat head screw means that the head of the screw presents a 90 degree flat angle, and some customers will also require an angle of 82° or 120°. Regardless of the angle of the head cap screw, the Shishitong screw factory can be produced according to your needs.

The countersunk cap screw is a classification of the screw. The head and bottom of the screw are flat and different from ordinary screws. How is the countersunk screw used? Now let’s take a look at how to use the countersunk cap screw.

The countersunk cap screws are mostly used in places where the surface of the parts cannot be raised after being installed. The parts to be fastened are thick and thin. The so-called thick, that is, the thickness of the parts to be fastened is larger than the head of the countersunk head screw. The thickness of the screw, after the screw is tightened, does not have a part of the screw thread into the threaded hole. In this case, the countersunk screws can certainly be tightened. There is usually also a case where the thickness of the fastened part is less than the height of the head of the countersunk head screw, which is common in mechanical equipment in sheet metal parts, such as the hinge of the case and the connection of the door and the case; the sheet metal of the device The connection of the cover to the device, etc. Now you know how to use the countersunk cap screw!

Skype: kalyn qin M: +86 18124507113 Tel: +86 0755-85296744 Email: annie.li@szsst88.com Add: No. 11, Dinghou Road, Dongfang Community, Songgang Street, Baoan District, Shenzhen, Guangdong, China