Can the button head self tapping screws be so short?

When many customers order button screws from Shi Shi Tong, they are basically threaded, and there are few self-tapping threads. The button screw that Mr. Chu needs is not the thread of the machine, but the button head self tapping screws.

There are two types of button head self tapping screws requested by Mr. Chu. One is ST2.9*12 and the other is ST2.9*2.5. The pitch requirement is 1.1, which is self-tapping. And Mr. Chu said that if the short one cannot be produced, the length can be cut to the length he needs.

According to Mr. Chu’s request, we said that it can be produced, and it is recommended that Mr. Chu’s short button head self tapping screws should lengthen the length. Because this length is too short, we are worried that it will not be able to tighten. Mr. Chu said that he did not need to produce according to his requirements.

After handing the screw to Mr. Chu, Mr. Chu expressed his satisfaction and said that this is the length he needs. Shi Shi Tong screw manufacturers can produce according to customer’s requirements. Your satisfaction is our pursuit.

If you want to customize button head self tapping screws, +long +screw +supplier