stainless steel self tapping screws torx is such a production?

Mr. Ning is an Australian company responsible for quality inspection in China. After the head office in Australia placed an order with us for stainless steel self tapping screws torx, Mr. Ning has been contacting us about the following problems.

Mr. Ning told us that he would come to the factory to see our procedures on the day of producing stainless steel self tapping screws torx, so we need to tell him the specific time, and he will spare that day to our factory.

On the day when the stainless steel self tapping screws torx was produced, Mr. Ning arrived at our factory after 10 o ‘clock. It was just right that we were at the end of debugging the machine. After 4 minutes, we started the first step of production. Mr. Ning watched from the side and arranged the production process. After a few light nails came out, Mr. Ning took a caliper to measure them and said why the diameter and length of the rod were not the same as the size in his drawing.

Since this step is only the head, the general shape of the screw is made, and the threaded part is not the same as the finished product. When rubbing teeth, the size of the bar will change, and the size will be the same as the finished product. Mr. Ning said he did not know that the original screw is to be produced in this way.

If you want to customize stainless steel self tapping screws torx, please send an email: annie.li@szsst88.com