How to screw the flat head electrical socket screws?

The installation of all electrical appliances is almost inseparable from the small screws, and the sockets are also fixed with flat head electrical socket screws. Do you know how to screw the flat head electrical socket screws?

A few days ago, some customers asked how the socket screw could not be screwed up. First of all, we first check the position of the screw, whether it is convenient for us to screw into the assembly, if it is not convenient, you can use a screwdriver to remove the socket panel. If the power cable is connected, you can tighten the screw of the terminal, not big. The problem; if it is necessary to replace the new socket, you can screw the flat head electrical socket screws on the terminal to the loosest, connect the neutral wire, the fire wire and the ground wire into the terminal, and then install the socket in a fixed position, screw The upper flat head electrical socket screws; finally, before the socket panel is fastened, we can test it first. If it can be used normally, then the socket panel can be installed and it can be used normally.

Flat head electrical socket screws can be found at the Shi Shi Tong screw factory. The Shi Shi Tong screw factory can mass produce the screws you need. Welcome electric appliance manufacturers, home appliance manufacturers, customers in need, and look forward to cooperation!

If you want to customize flat head electrical socket screws, please send an email: annie.li@szsst88.com