Application of stainless steel hollow rivets and half round rivet

We have said that the types of rivets commonly used, there are many types of rivets, their use is different, today we Shi Shi Tong screw manufacturers to talk about commonly used rivets, hollow rivets and half round rivet.

Hollow rivets are shown in the figure. These hollow rivets are usually used in clothing, footwear and other industries. Solid rivets need to be riveted again. They are often used for coupling on heavy industrial workpieces. They are often non-removable structures. Semi-tubular rivets are the most widely used. The rivet is made of hard wire. It can be used without the pre-hole to penetrate the steel plate with a thickness of 0.5mm. The rivet can not be bent and deformed. It is widely used in password boxes, suitcases, and military bags. Hollow nails (semi-tubular rivets) are often manufactured using flexible cords. Generally, rivets are not cracked after opening. There are many types. At present, the shaft that causes the toy has begun to use large-area semi-hollow nails or sub-nails instead. The production cost can be greatly reduced. The blind rivets and the core rivets are mostly used for the riveting of relatively thin soft materials. The general requirements are not strict, and the manufacturing materials are usually manufactured by using plastic materials with good plasticity.

The half round rivet is mainly used for riveting of large lateral loads. It is the most widely used. Flat-cone rivets are resistant to corrosion due to the hypertrophy of the nail head, and are often used in corrugated occasions where the ship’s hull and boiler water tank are strongly corroded. Countersunk head and 1200 countersunk rivets are mainly used for riveting applications where the surface must be smooth and with little load. Semi-recessed head, 1200 semi-recessed rivets are mainly used for riveting applications where the surface must be smooth and with little load. Flat head and flat head rivets are mainly used for riveting of metal sheets or non-metallic materials such as leather, canvas and wood. Large flat head rivets are mainly used for riveting of non-metallic materials.

half round rivet are mainly used for riveting applications with small loads. Headless rivets are mainly used for riveting of non-metallic materials. The hollow rivets are light in weight and weak in the nail head, and are used for riveting of non-metallic materials with little load. Tubular rivets are used for riveting of non-metallic materials that do not follow the load. Sign rivets are mainly used for riveting the nameplate on the machine, equipment, etc.

The blind rivet is a type of rivet for single-sided riveting, but it must be riveted with a special tool, a rivet gun (manual, electric, and moving). These rivets are especially suitable for riveting applications where ordinary rivets (which must be riveted from both sides) are inconvenient, so they are widely used in construction, automobiles, ships, airplanes, machinery, electrical appliances, furniture and other products. Among them, open-type flat head blind rivets are the most widely used.

Countersunk core rivets are suitable for riveting applications where smoothing is required. Closed blind rivets are suitable for riveting applications that require higher loads and have certain sealing properties. The core rivet is another type of rivet with single-sided riveting. When riveting, the hammer is used to strike the rivet head to expose the nail core, so that it is flush with the end surface of the nail head, which is convenient for the riveting operation. It is especially suitable for inconvenience. Riveting with ordinary rivets (riveted from both sides) or blind rivets (lack of rivet guns). Flat-headed core rivets are usually used, and countersunk core rivets are suitable for applications where the surface requires smooth riveting.

The scenes used by different rivets are different. Besides the different sizes and specifications, the shape can also be customized according to customer requirements. Shenzhen Shi Shi Tong Screw Factory is a professional custom manufacturer of stainless steel screws, special screws, non-standard screws. The manufacturer of special-shaped screw fasteners can be customized according to the requirements of customers.

If you want to find half round rivet please contact us: annie.li@szsst88.com whatsapp: +86 18124507113