Can a long socket screws with threads on both ends be made?

The screws we usually see are generally composed of a head and a shaft. This kind of screw is formed by cold heading or turning. Can long socket screws with threads on both ends be made?

The screws that Mr. Zhang needs are long screws with threads on both ends. The length is 305mm, there needs to be M5*20mm long threads on both sides, there is no thread in the middle, and the rod diameter needs to be less than 5.4mm and greater than 5mm. According to Mr. Zhang’s description, Shi Shi Tong can produce.

The production method of these long socket screws is mainly to cut the material according to the length of the screw, and the cut screw is rubbed on both ends. And because the rod diameter required by Mr. Zhang is 5-5.4, Shi Shi Tong can use 5.25mm wire for production, and it can be produced directly without adding a lathe.

However, Mr. Zhang said that his long socket screws are in the stage of trial production. In the early stage, his order quantity will not be large, so Mr. Zhang needs to confirm whether World Shi Shi Tong can produce it according to his trial production quantity. World Shi Shi Tong also understands Mr. Zhang’s requirements, and can also produce according to Mr. Zhang’s quantity.