Have you been deceived when looking for a torx screw manufacturers?

With the rapid development of modern industry, there are more and more places where the screws are used. With the increase in the use of torx screw, there are more and more torx screw manufacturers. The manufacturers in the market are not in the same situation. At this time, customers will inevitably be deceived when they are looking for a torx screw manufacturers.

Before the holiday on May 1st, Mr. Xiang from Shenzhen Songgang contacted the Shi Shi Tong screw manufacturer through the network. Mr. Xiang said that he needs to use a stainless steel 304 material, and the surface treatment is black zinc plated torx screw. I hope to play the role of anti-slip and anti-loose. However, the screws that Mr. Xiang purchased from another torx screw manufacturers were deformed during the use of the screws, and the surface of the screws partially fell off.

According to Mr. Xiang’s description, we asked how much torque was used by Mr. to screw this screw. If the torque used exceeds the range that the screw can withstand, it will cause head deformation. Or there is a problem with the material used to produce the torx screw. To the gentleman, they said that the torque they use is within the range of torque. Deformation may be a problem with the material.

The reason why the surface treatment of the torx screw is peeled off is mainly that the adhesion of the black zinc to the stainless steel is not so strong. Therefore, we also told Mr. Xiang that he is not recommended to do black zinc.

After Mr. Xiang saw our news, I realized why his situation happened. But Mr. Xiang also wants to make the surface black, and the material should not be replaced with carbon steel. Mr. Xiang asked us if there are other surface treatments for stainless steel that can be made black? Then we told Mr. Xiang that in addition to black zinc plated, stainless steel can also be vacuumed, high-temperature blackening and electrophoresed. At the same time, I told Mr. Xiang about the advantages and disadvantages of these surface treatments and the pictures of the screws that we have done on these surface treatments.

Telling us behind Mr.Xiang, he wants to make it high-temperature blackening. And let us give him a contract when he will pay. At the time of shipment from Mr. Xiang, we attached Mr. Xiang to the shipping report and the original material testing report. Mr. Xiang checked it when he received the torx screw and found no problems. Mr. Xiang was very happy and said that we are a professional torx screw manufacturers.

If you want to find socket screw manufacturer please contact us: annie.li@szsst88.com.