This small self tapping screws manufacturer thinks about the problem from the customer’s point of view.

Since the small self tapping screws are frequently used parts, sometimes the screws may have quality problems such as rust and breakage and need to be replaced. But if you change it often, you have to think about the problem. Mr. Mu of Shenzhen has encountered such problems.

Mr. Mu needs to use small self tapping screws from time to time. Recently, the small self-tapping screws purchased by Mr. Mu frequently have quality problems. The screws assembled are less than one month, and the screws on the top are basically rusted. Mr. Mu will re-purchase a small number of small self-tapping screws, which will also lead to an increase in Mr. Mu’s procurement costs.

Therefore, Mr. Mu was very experienced in the screwing of the Shi Shi Tong screw manufacturer. He consulted the Shi Shi Tong screw manufacturer and also brought the assembled products and the previous small self tapping screws. After carefully inquiring about the use scenes of Mr. Mu’s products, the grades produced, etc., Shi Shi Tong told Mr. Mu that the reason why the screws would rust one month would be an environment to use. Screws are used in scenes that occasionally carry corrosive gases. However, Mr. Mu did not have any requirements for salt spray testing.

And during the inspection of the small self-tapping screws, we also found that the threads were partially rusted. Just ask Mr. Mu, this is the original one, or it has been used after a period of use. Mr. Mu said that these samples have not been used before. I took a few pieces from the original packaged screws. Then these screws are not processed during the cleaning process, causing the threads to rust.

Then we asked if there are a lot of screws that Mr. Mu has not used yet? If there are many, and now the rust is not serious, you can get the surface of the electroplating factory to re-process the screws. In this case, some rust can be removed and the screws can be used. At the same time, it can also reduce the cost of Mr. Mu.

If you want to know more about small self tapping screws please feel free to contact us at annie.li@szsst88.com