What is a stripped screw?

What is a stripped screw? Let’s see what sliding silk is.

Sliding wire refers to the situation that screw joint cannot bite and screw connection cannot be tightened due to excessive force or other reasons leading to screw tooth wear.There are several reasons to analyze the screw from the point of view of physics.Second, the device wear is too large;Third, the quality of materials is very poor.Is there any way to solve this problem stripped screw? The answer is yes. Look down:

★Put some things on the screw head, such as double-sided adhesive, non-woven cloth, etc., or paper if the conditions are really not available, so as to increase the friction.

★Inject a small amount of 502 glue into the screw hole, and then screw in the screw. After the glue is set, unscrew the screw out with the tip pliers (the reason why the screwdriver is not used is that it may cause the stripped screw), and the glue should be completely hardened (this operation is difficult to be careful).

★Heat the top part of the screwdriver on the gas burner and quickly top the screw for about 5 seconds so it can be unscrewed.

★Hit off the gong cap with a drill.Use the principle of reverse wire to drill out the remaining screws (you can use the special drill bit for the broken head – the broken head screw extractor.

Actually the superior is in civilian, to how to handle slippery stripped screw, method has a lot of, which convenient to use which good.I hope it helps: kalyn@szsst88.com